Full Guide Smoked Rear Reflector With LEDs Installation Instructions for Mazda 3


If you searching for Full Guide Smoked Rear Reflector With LEDs Installation Instructions for Mazda 3, you come to the right place. Here you can read or download the article directly from the official website. This Full Guide Smoked Rear Reflector With LEDs Installation Instructions for Mazda 3 user manual, user guide, instruction manual, how to instruction, service manual or repair manual is provided by the manufacturer, and you will read or download from their server.

You can read or download Full Guide Smoked Rear Reflector With LEDs Installation Instructions for Mazda 3 below. In addition to providing this file, we also provide user guide, drivers and software of any brand. Check any other articles by browse all content of this site.

Download link is loading from the server
Please wait 22 seconds.

Full Guide Smoked Rear Reflector with LEDs Installation Instructions for Mazda 3

Part of content: Remove covers on both sides of hatch. (below). Use a 10mm socket (with extension) to remove the nuts that secure the rear tail lamps. (right). Remove both of the rear tail lamps. This may require a small amount of force as there are plastic ball/socket joints that hold the lamps in place. Once the lamps are free, disconnect the wiring harnesses from the bulb sockets. (right).

Use a flat-head screwdriver to remove the fasteners, and a Phillips-head screw driver to remove the screws, that secure the rear bumper to the body of the car. They are located where the tail lamps normally sit. (right). Use a Phillips-head screwdriver to remove the screws that hold the rear-facing reflectors in place. Then, use a flat-head screwdriver to press on the clip in order to pop out the reflectors.

car manual book

Related Manual: