Signal Mirror Installation Instructions for Toyota Land Cruiser 1998 – 2007
Part of content: Small pry bar Needle nose pliers Wire crimper and stripper Masking tape Multimeter Sturdy gloves Safety glasses or goggles. 1. Start with the driver’s side door and lower the window. (A) 2. Use a small slotted screwdriver to remove the plastic screw cover located on the inside section of the door. (B) 3. Remove the screw behind the screw cover and the screw located directly below the corner speaker.
(C) Wiring for Toyota Land Cruiser 1998 – 2002 and Lexus LX-470 1998 – 2005. Using one of the two harnesses from the wiring kit, start on the inside of the mirror and guide the end without the mating connector into the mirror housing. Run the wire alongside the existing factory mirror harness.
