Installation Instruction Dodge D-Series Spring Set Motor Clutches Brakes
Mount the brake to the motor taking care to properly engage the splined hub with the splined bore of the friction disc in the brake. If force seems to be needed for proper mounting, look for other problem areas such as foreign matter in the spline or cocking of the brake. The manual release levers are located on the back of the brake opposite the input hub for the single C-face models (see Diagram B).
On the double C-face models they are located on the output shaft side, MAINTENANCE GUIDE. New brakes DO NOT require wear adjustment. Adjustment of the air gap is necessary if either or both of the following conditions are observed: 1) A decrease in braking torque. Adjustment is recommended when braking torque drops to approximately 80% of its static rating.
